Skip to content
Guide · 6 min read · Updated 15 November 2026

Labour Welfare Fund (LWF): a practical guide for employers

A guide to the state-level Labour Welfare Fund: who contributes, how often, how it differs by state and how to keep it on the calendar.

The Labour Welfare Fund is the least talked about statutory deduction on an Indian payslip. It is a small contribution, usually paid once or twice a year, so it is easy to forget until a notice arrives. This guide explains the general structure, why it varies by state, and how to keep it from slipping.

Figures here reflect the rules as we understand them at the time of writing. Verify against the current rules and notifications before relying on them.

What the Labour Welfare Fund is

Several states run labour welfare funds under their own statutes. The money collected goes to a state welfare board, which uses it for schemes for workers and their families, such as education support, housing or health programmes, depending on the state.

The fund is built from small contributions by employees and employers, and in some states by the government. The details of coverage, rates and dates are in the state Act and its schedule of rates. The structure is simple, but there is no single national table to learn.

Who is covered

Coverage depends on the state law. In general, the fund applies to establishments such as factories, shops and commercial establishments, with a minimum number of employees in some states. Within a covered establishment, many states bring in all employees, while others apply a salary threshold, and some distinguish between categories of workers.

Because of this variation, the first task is to decide for each state where you have employees whether LWF applies and from which date. Do this when you open an office, not when the first notice arrives.

How contributions work

The usual features, as we understand them:

  • A fixed amount from the employee, deducted from salary.
  • A fixed amount from the employer, often a larger sum than the employee’s share.
  • Payment at set intervals, commonly half-yearly or yearly, sometimes monthly in a few states.
  • Amounts in rupees, not as a percentage of salary, with revisions every few years.
  • In some states, a salary-based slab rather than one flat amount.

The employee share is typically small. The employer’s obligation includes depositing both shares, even when it has not deducted the employee’s part, so a missed deduction becomes the employer’s cost.

Worked example

We do not quote state amounts here, because they are revised and an old number is a liability. To see the mechanics, assume a state with a half-yearly fund where the employee pays Rs E and the employer pays Rs R per employee for each half-year, due on 15 July and 15 January.

For a company with 40 covered employees:

  • Employee deductions in the due month: 40 x E
  • Employer share: 40 x R
  • Total deposit for the half-year: 40 x (E + R)

If an employee leaves in October, the January contribution may or may not include them, depending on the state rule about the period of employment. If someone joins in December, the same question applies. These period rules are where mistakes happen, so read the state notification and record your decision.

For a Gujarat or Maharashtra example, use the current schedule on the relevant labour department site, apply the amounts to your headcount in the way shown above, and compare the result with what your payroll software computes. The match tells you whether your set-up is right.

Set-up, due dates and returns

Payroll set-up

LWF is easiest to handle when each employee’s work state is correct in the employee record, because the state decides the table. Before the due month, run a short check:

  • List employees by state and confirm which states levy the fund.
  • Confirm that new joiners since the last due date have a state recorded.
  • Decide how you treat employees who joined or left during the half-year, and apply that rule to everyone.
  • Tell staff in advance that a deduction is coming, with the amount and the reason.
  • After payment, file the challan and receipt against the period, so the next person to run the calendar can see what was done.

A year-end review is also useful. Compare the number of employees covered in each state with the number in the deposit, and look into any gap before a notice does.

Due dates and returns

Due dates vary. For its two supported states Saralix assumes 15 July and 15 January, and these are assumptions to confirm against the state notification and any recent change in the schedule. Some states want a return with the payment, listing employees and amounts. Others accept a challan alone.

A reasonable habit is to put the LWF dates on the calendar a month ahead and to check the schedule of rates each year in the month before the first due date. The payroll compliance calendar shows where LWF sits among other items.

Registration

In states that levy LWF, the employer usually registers with the state labour welfare board or the labour department. You will normally need the establishment’s registration under the Shops and Establishments Act or the Factories Act, the address, the number of employees, and the details of the authorised signatory. Some states have online portals, and others work through local labour offices.

After registering, record the registration number in your payroll settings and keep the certificate with your statutory file. If you change the name or address, or close a branch, tell the board so that its records match yours.

How Saralix handles it

Saralix has Labour Welfare Fund tables for Gujarat and Maharashtra. For employees in those states, LWF is worked out from each locked payroll and listed as a liability for the state, with its due date and a paid, overdue or due-soon status. The assumed due dates are 15 July and 15 January.

For employees in any other state, the payslip shows a warning that the state’s table is not covered, so you know to handle LWF outside the system. You record each payment with a challan number and a receipt, the entry is audited, and the reports section has an LWF report you can export. The statutory master is versioned with effective dates, so when a state revises its amounts, the new table applies from the month you set, and you can see what is in force under Compliance > Rules. For a wider picture, see the compliance and tax features page and the earlier post on ESI and professional tax basics by state.

Common mistakes

  • Assuming LWF applies everywhere, or nowhere. It depends on the state, and you need to check each one.
  • Missing the half-yearly month. A deduction that appears twice a year is easy to forget, and the due date can be a few weeks after the deduction month.
  • Using last year’s amounts. Revisions happen, and the new schedule starts on a date, not at the start of your payroll year.
  • Forgetting the employer share. The deposit is the sum of both shares.
  • Ignoring leavers and joiners. Decide how part-period employees are treated, and apply it consistently.
  • No communication to staff. A deduction in one month that nobody expected leads to queries. A line in the payroll notice ahead of the month avoids this.
  • Treating other states as exempt by default. A warning on the payslip is a prompt to check, and not a sign that nothing is due.

Verify against current rules

Before relying on this guide, confirm:

  • Whether each state where you have employees runs a labour welfare fund, and the Act under which it operates.
  • The current amounts for employee and employer, and any salary threshold, from the state’s notification.
  • The payment frequency and the due date, including any recent change to the schedule.
  • The registration process and the portal or office to use, from the state labour department or welfare board.
  • Whether a return or statement is required with the payment, and its format.
  • The treatment of joiners, leavers and employees on leave during the contribution period.

If you have staff in more than one state, the professional tax guide covers a similar set of questions and is worth reading together with this one. For plan details see Saralix pricing.

Questions

Is the Labour Welfare Fund a national scheme?

No. LWF is governed by state laws, and each state sets its own rules for who is covered, the amount, the frequency and the due date. Some states do not run a fund at all. As a result, a company with offices in several states may have different obligations in each.

How much is the LWF contribution?

As we understand it, the amounts are small and fixed, with a share from the employee and a larger share from the employer in many states. The amounts and the salary thresholds are revised from time to time. Check the current notification of the state before you set the figure.

How often is LWF paid?

It varies. Many states collect it half-yearly or yearly, which means it appears in payroll in one or two months of the year. Saralix assumes 15 July and 15 January for its two supported states, and you should confirm that against the state notification.

Does LWF reduce the employee's take-home?

The employee share is deducted from salary in the month it is due. Because it is a small amount collected rarely, it can surprise employees. A note in the payroll communication before the month helps.

Do we need to register for LWF?

In states that levy it, an employer covered by the Act generally registers with the state welfare board or labour department. The process, forms and portals differ, so ask the state labour department what applies to your establishment.

Compliance worked out from every payroll.

Saralix tracks liabilities, due dates and return files for PF, ESI, PT, LWF and TDS.